Skip to main content

Using SConfig to set IP address on Server Core 2008 R2

Microsoft gave us a nice tool to use with the release of Windows Server 2008 R2 when working with server core. To set the IP address on Server Core 2008 R1, you would have to follow this procedure:

· Type netsh interface ipv4 show interfaces
· Press Enter
· Record the name of the interface you want to set a static IP address for. Sample output is below.

Idx Met MTU State Name
--- --- ----- ----------- -------------------
3 5 1500 Connected Local Area Connection

· Type netsh interface ipv4 set address name=3 source=static address=10.10.1.10 mask=255.255.0.0
· Optionally, you can add a gateway address by appending gateway=address to the end of the command.
· In the Name parameter, we used the Idx value. We could have also typed “Local Area Network”.

The above method still works if you need to batch file something. Now with the R2 version, you can use a menu based system thanks to SConfig.

On you Server Core 2008 R2, log in and type sconfig.

image

Press 8 for Network Settings.

image

Select the index number for the network adapter that you want to configure. In this case, it will be 0.

image

Press 1 to Set Network Adapter IP Address

image

We can set this server core for DHCP by pressing D. It will only take a few seconds for the change to take effect. Had this adapter already been set to DHCP, we could click S for Static address.

image

You will need to enter data for the IP Address, Subnet Mask, and Default Gateway.

Once completed, you can set the DNS server if necessary by selecting 2

image

You will be given a chance to configure both a primary, and a secondary DNS server if you need to.

Once you are finished, press 4 to exit to the main menu and then 13, to exit SConfig.

Comments

Unknown said…
Thank you for posting this Jason. It works like a charm and a lot easier than CLI.

Popular posts from this blog

Adding a Comment to a GPO with PowerShell

As I'm writing this article, I'm also writing a customization for a PowerShell course I'm teaching next week in Phoenix.  This customization deals with Group Policy and PowerShell.  For those of you who attend my classes may already know this, but I sit their and try to ask the questions to myself that others may ask as I present the material.  I finished up my customization a few hours ago and then I realized that I did not add in how to put a comment on a GPO.  This is a feature that many Group Policy Administrators may not be aware of. This past summer I attended a presentation at TechEd on Group Policy.  One organization in the crowd had over 5,000 Group Policies.  In an environment like that, the comment section can be priceless.  I always like to write in the comment section why I created the policy so I know its purpose next week after I've completed 50 other tasks and can't remember what I did 5 minutes ago. In the Group Policy module for PowerShell V3, th

Return duplicate values from a collection with PowerShell

If you have a collection of objects and you want to remove any duplicate items, it is fairly simple. # Create a collection with duplicate values $Set1 = 1 , 1 , 2 , 2 , 3 , 4 , 5 , 6 , 7 , 1 , 2   # Remove the duplicate values. $Set1 | Select-Object -Unique 1 2 3 4 5 6 7 What if you want only the duplicate values and nothing else? # Create a collection with duplicate values $Set1 = 1 , 1 , 2 , 2 , 3 , 4 , 5 , 6 , 7 , 1 , 2   #Create a second collection with duplicate values removed. $Set2 = $Set1 | Select-Object -Unique   # Return only the duplicate values. ( Compare-Object -ReferenceObject $Set2 -DifferenceObject $Set1 ) . InputObject | Select-Object – Unique 1 2 This works with objects as well as numbers.  The first command creates a collection with 2 duplicates of both 1 and 2.   The second command creates another collection with the duplicates filtered out.  The Compare-Object cmdlet will first find items that are diffe

How to list all the AD LDS instances on a server

AD LDS allows you to provide directory services to applications that are free of the confines of Active Directory.  To list all the AD LDS instances on a server, follow this procedure: Log into the server in question Open a command prompt. Type dsdbutil and press Enter Type List Instances and press Enter . You will receive a list of the instance name, both the LDAP and SSL port numbers, the location of the database, and its status.